// Load Wi-Fi library
#include
// Replace with your network credentials
const char* ssid = "MishMashLabs";
const char* password = "mishmash";
// Set web server port number to 80
WiFiServer server(80);
// Variable to store the HTTP request
String header;
// Auxiliar variables to store the current output state
String output15State = "off";
String output4State = "off";
// Assign output variables to GPIO pins
const int output15 = 15;
const int output4 = 4;
// Current time
unsigned long currentTime = millis();
// Previous time
unsigned long previousTime = 0;
// Define timeout time in milliseconds (example: 2000ms = 2s)
const long timeoutTime = 2000;
// Define Authentication
const char* base64Encoding = "TWlzaE1hc2hMYWJzOm1pc2htYXNo"; // base64encoding user:pass - "dXNlcjpwYXNz", MishMashLabs:mishmash - "TWlzaE1hc2hMYWJzOm1pc2htYXNo"
void setup() {
Serial.begin(115200);
// Initialize the output variables as outputs
pinMode(output15, OUTPUT);
pinMode(output4, OUTPUT);
// Set outputs to LOW
digitalWrite(output15, LOW);
digitalWrite(output4, LOW);
// Connect to Wi-Fi network with SSID and password
Serial.print("Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
// Print local IP address and start web server
Serial.println("");
Serial.println("WiFi connected.");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
server.begin();
}
void loop(){
WiFiClient client = server.available(); // Listen for incoming clients
if (client) { // If a new client connects,
currentTime = millis();
previousTime = currentTime;
Serial.println("New Client."); // print a message out in the serial port
String currentLine = ""; // make a String to hold incoming data from the client
while (client.connected() && currentTime - previousTime <= timeoutTime) { // loop while the client's connected
currentTime = millis();
if (client.available()) { // if there's bytes to read from the client,
char c = client.read(); // read a byte, then
Serial.write(c); // print it out the serial monitor
header += c;
if (c == '\n') { // if the byte is a newline character
// if the current line is blank, you got two newline characters in a row.
// that's the end of the client HTTP request, so send a response:
if (currentLine.length() == 0) {
// check base64 encode for authentication
// Finding the right credentials
if (header.indexOf(base64Encoding)>=0)
{
// HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
// and a content-type so the client knows what's coming, then a blank line:
client.println("HTTP/1.1 200 OK");
client.println("Content-type:text/html");
client.println("Connection: close");
client.println();
// turns the GPIOs on and off
if (header.indexOf("GET /15/on") >= 0) {
Serial.println("GPIO 15 on");
output15State = "on";
digitalWrite(output15, HIGH);
} else if (header.indexOf("GET /15/off") >= 0) {
Serial.println("GPIO 15 off");
output15State = "off";
digitalWrite(output15, LOW);
} else if (header.indexOf("GET /4/on") >= 0) {
Serial.println("GPIO 4 on");
output4State = "on";
digitalWrite(output4, HIGH);
} else if (header.indexOf("GET /4/off") >= 0) {
Serial.println("GPIO 4 off");
output4State = "off";
digitalWrite(output4, LOW);
}
// Display the HTML web page
client.println("");
client.println("");
client.println("");
// CSS to style the on/off buttons
// Feel free to change the background-color and font-size attributes to fit your preferences
client.println("");
// Web Page Heading
client.println("
ESP32 Web Server
");
// Display current state, and ON/OFF buttons for GPIO 15
client.println("
GPIO 15 - State " + output15State + "
");
// If the output15State is off, it displays the ON button
if (output15State=="off") {
client.println("
");
} else {
client.println("
");
}
// Display current state, and ON/OFF buttons for GPIO 4
client.println("
GPIO 4 - State " + output4State + "
");
// If the output4State is off, it displays the ON button
if (output4State=="off") {
client.println("
");
} else {
client.println("
");
}
client.println("");
// The HTTP response ends with another blank line
client.println();
// Break out of the while loop
break;
}
else{
client.println("HTTP/1.1 401 Unauthorized");
client.println("WWW-Authenticate: Basic realm=\"Secure\"");
client.println("Content-Type: text/html");
client.println();
client.println("Authentication failed");
}
} else { // if you got a newline, then clear currentLine
currentLine = "";
}
} else if (c != '\r') { // if you got anything else but a carriage return character,
currentLine += c; // add it to the end of the currentLine
}
}
}
// Clear the header variable
header = "";
// Close the connection
client.stop();
Serial.println("Client disconnected.");
Serial.println("");
}
}
To learn more HTML/CSS, check out these tutorials!